-40%
Genuine Harley Davidson five bar sport luggage rack like new
Genuine Harley Davidson five bar sport luggage rack like new
Genuine Harley Davidson five bar sport luggage rack like new
Genuine Harley Davidson five bar sport luggage rack like new
Genuine Harley Davidson five bar sport luggage rack like new

Genuine Harley Davidson five bar sport luggage rack like new

$ 13.2

Availability: 64 in stock
  • Modified Item: No
  • Color: Chrome
  • Warranty: Guaranteed to be a luggage rack
  • Returns Accepted: ReturnsNotAccepted
  • Condition: As new. Run one season only. I changed to a three-channel luggage rack so I can use a certain tailbag. Includes the flathead torx screws that came in the kit. Look on the HD pages - similar racks are selling for one and a half times the BIN price. It is currently unavailable from HD. Mounts to your sissy bar using holes that are already there. You replace the button head screws with the flathead screws that came with the rack. Here's something they don't tell you: Mount the rack to the sissy bar before you put it on the bike. The fender interferes with the lower screws if you don't do it like that. Don't ask me how I know. Blue tape in the pictures is just so I don't lose the screws. There is no damage. This is a nice part.
  • Brand: Harley Davidson
  • Country/Region of Manufacture: United States
  • Manufacturer Part Number: 53862-00

    Description

    Harley Davidson five bar sport luggage rack. Like new condition, run one season only. I used it on a 2007 Softail but it fits lots of other bikes. You can use the part number on the HD website to see if it fits your bike.
    From the HD website:
    Fits '04-later XL models (except XL1200CX) equipped with Detachable Sideplates, '06-'17 Dyna
    ®
    models (except FXDF, FXDFSE and '10-'17 FXDWG) equipped with Detachable Sideplates, '84-'05 Softail
    ®
    (except FLSTN and FXSTD), '06-'17 FLST, FLSTC and FLSTSC and '06 FLSTF models equipped with Detachable Mount Sideplates. Does not fit with Round Bar Uprights P/N 52300018, 52300020, 52300022 and 52300024.
    1.
    See
    Figure 1
    . Remove the four button-head TORX screws attaching the sissy bar (5) to the sideplates (4). Discard the screws
    2.
    Remove the sissy bar and set it aside.
    For Rigid-Mount Sideplates only:
    Loosen, but do not remove, the hardware securing the sideplates to the motorcycle.
    3.
    Position the luggage rack between the sideplates. Reinstall the sissy bar into the sideplate channels.
    4.
    Apply Loctite 271 (Red) to the flat head TORX screws (2) from the kit, and insert through the holes in the luggage rack (1), sideplate, and sissy bar. Tighten the screws to 10.8–13.6 N·m (8–10 ft-lbs).
    For Rigid-Mount Sideplates only:
    Apply Loctite 271 (Red) to the screws securing the sideplates to the motorcycle, and tighten to 28.5–36.6 N·m (21–27 ft-lbs).
    5.
    Remove the backing strip from the two rubber bumpers (3) and install onto the luggage rack.
    a. Align the notches in the bumper with the bottom edge of the channel on the sideplate.
    b. Wrap the bumper up the side of the luggage rack channel and across the bottom of the sissy bar. When properly installed the bumpers will cover the lower flat head screws, and will bend around the lower edge of the channel.