PULSAtron® Series MP Pump‚ 3 GPD‚ 300 PSI‚ LMK2TA-KTC1-500

Description

PULSAtron® Series MP Pump‚ 3 GPD‚ 300 PSI‚ LMK2TA-KTC1-500
Pulsafeeder’s most advanced pump
Designed for easy integration to automatic chemical feed systems
Pulsafeeder’s digital MP series pumps feature a 6-key keypad that allows easy programming and manual control of the pump speed. The speed is adjusted to 1 stroke/ hour to 125 strokes per minute. In the external mode, the pump will accept 4-20 mA, 20-4 mA or pulse signals. The pulse signals are available in two modes: pulse divide and pulse multiply. Pulse divide allows the pump to respond with a pre-programmed amount of strokes for every 1 to 999 incoming pulses. In pulse multiply mode, the pump can be programmed to stroke from 1 to 999 times for every incoming pulse. Stroke length is adjusted using the dial located in the center of the panel.
All MP Series pumps come standard with a stop function port that allows you to automatically shut off the pump when there is no flow in the process stream or when your chemical day tank is empty. All pumps come with a signal relay port that can be used to send signal to an autodialer or alarm panel. The pumps also feature an interval timer which can be programmed to operate for selected run times of 1 to 999 minutes (16 hours) at selected intervals from 1 to 999 hours (41 days) at a selected stroking rate. The totally enclosed, chemically resistant housing protects pumps in the harshest environments. Encapsulated electronics and a rigid housing ensure years of precise, repeatable performance.
Includes: an injection check valve assembly, foot valve/strainer, suction valve, discharge valve, 5-function valve ), 4 ft PVC suction tubing, 8 ft polyethylene discharge tubing and 4 ft return tubing. The pumps also include 3 signal cords; 1 signal cord for external pacing or 4-20 mA signal input, 1 stop function signal cable, and 1 signal cord for signal relay. Repair kits include: pump head, replacement diaphragm, seal, 4 pump head screws and check valves.